ADTRAN 1000R Series Command Reference Manual page 70

Command Reference Guide
clear port-security violation-count <interface id>
Use the clear port-security violation-count command to clear the violation count associated with a
particular interface.
Syntax Description
<interface id>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1
Usage Examples
The following command clears the violation count associated with the Ethernet interface 0/1:
>enable
#clear port-security violation-count eth 0/1
61200510L1-35E
Clears the information for the specified Ethernet interface. Type clear
port-security violation-count interface ? for a complete list of applicable
interfaces.
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
70