ADTRAN 1000R Series Command Reference Manual page 486

Command Reference Guide
qos cos-map <cos queue id> <cos value 0> <cos value 1>...<cos val 7>
Use the qos cos-map command to associate cost of service (CoS) values with each queue.
Syntax Description
<cos queue id>
<cos val 0>
<cos val 1-7>
Default Values
By default, CoS 0 and 1 are mapped to queue 1; CoS 2 and 3 are mapped to queue 2; CoS 4 and 5 are
mapped to queue 3; CoS 6 and 7 are mapped to queue 4.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1
Usage Examples
The following example maps CoS values 4 and 5 to queue 1:
(config)#qos cos-map 1 4 50
61200510L1-35E
Specifies the queue number to which you are assigning CoS value(s).
Associates listed CoS values with a particular priority queue.
Optional. Associates up to eight CoS values with the queue.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
486