Show Spanning-Tree Summary - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide

show spanning-tree summary

Use the show spanning-tree summary command to display a brief summary of the spanning tree.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 5.1
Usage Examples
The following is an example output using the show spanning-tree summary command:
>enable
#show spanning-tree summary
Spanning tree default pathcost method is short
Blocking
--------------
0
61200510L1-35E
Command was introduced.
Listening Learning
-------------- --------------
0 0
Copyright © 2005 ADTRAN
Enable Mode Command Set
Forwarding STP Active
--------------- ----------------
12 12
299