Show Thresholds - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide

show thresholds

Use the show thresholds command to display thresholds currently crossed for all DS1 interfaces.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
>enable
#show thresholds
t1 1/1:
SEFS 15 min threshold exceeded
UAS 15 min threshold exceeded
SEFS 24 hr threshold exceeded
UAS 24 hr threshold exceeded
t1 1/2:
No thresholds exceeded
61200510L1-35E
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
310