ADTRAN 1000R Series Command Reference Manual page 921

Command Reference Guide
spanning-tree bpduguard [enable | disable]
Use the spanning-tree bpduguard command to block BPDUs from being received on this interface. To
return to the default value, use the no form of this command.
Syntax Description
enable
disable
Default Values
By default, this command is set to disable.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 5.1
Usage Examples
The following example enables the BPDU guard on the interface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#spanning-tree bpduguard enable
61200510L1-35E
Enables the BPDU block.
Disables the BPDU block.
Command was introduced.
Copyright © 2005 ADTRAN
Frame Relay Sub-Interface Config Command Set
921