ADTRAN 1000R Series Command Reference Manual page 657

Command Reference Guide
switchport port-security maximum <max value>
Use the switchport port-security maximum command to configure the maximum number of secure
MAC addresses associated with the interface.
Syntax Description
<max value>
Default Values
The default value for this command is 1.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1
Usage Examples
The following example sets the maximum supported MAC addresses for Ethernet interface 0/1 to 2:
(config)#interface eth 0/1
(config-eth 0/1)#switchport port-security maximum 2
61200510L1-35E
Specifies the maximum number of secure MAC addresses to be associated with
the interface. Range: 1 to 132.
Command was introduced.
Copyright © 2005 ADTRAN
Ethernet Interface Configuration Command Set
657