Command Reference Guide
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest
null
Default Values
By default, this is set to null (meaning no authentication is used).
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 3.1
Release 8.1
Usage Examples
The following example specifies that no authentication will be used on the ATM sub-interface 1.1:
(config)#interface atm 1.1
(config-atm 1.1)#ip ospf authentication null
61200510L1-35E
Optional. Specifies message-digest authentication type.
Optional. Specifies that no authentication be used.
Command was introduced.
ATM sub-interface was added.
Copyright © 2005 ADTRAN
ATM Sub-Interface Config Command Set
762