Debug Port Security - ADTRAN 1000R Series Command Reference Manual

Command Reference Guide Enable Mode Command Set

debug port security

Use the debug port security command to display messages associated with port security. Debug messages
are displayed (real time) to the terminal (or Telnet) screen. Use the no form of this command to disable
debug messages.
Syntax Description
No subcommands.
Default Values
By default, all debug messages in the AOS are disabled.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example activates port security debug messages:
>enable
#debug port security
61200510L1-35E Copyright © 2005 ADTRAN 135