ADTRAN 1000R Series Command Reference Manual page 44

Command Reference Guide
clear counters port-channel <interface id>
Use the clear counters port-channel command to reset counters on the specified port channel.
Syntax Description
<interface id>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, and 1000R Series units.
Command History
Release 8.1
Usage Examples
The following example clears all counters for port channel 1:
>enable
#clear counters port-channel 1
61200510L1-35E
Specifies a valid interface ID to clear (e.g., 1 for port channel 1).
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
44