ADTRAN 1000R Series Command Reference Manual page 45

Command Reference Guide
clear counters vlan <vlan id>
Use the clear counters vlan command to reset counters on the specified virtual local area network
(VLAN) interface.
Syntax Description
<vlan id>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, and 2000 Series units.
Command History
Release 5.1
Usage Examples
The following example resets the counters on VLAN interface 7:
>enable
#clear counters vlan 7
61200510L1-35E
Specifies a valid VLAN interface ID (1 to 4094).
Command was introduced.
Copyright © 2005 ADTRAN
Enable Mode Command Set
45