ADTRAN 1000R Series Command Reference Manual page 936

Command Reference Guide
dial-backup auto-backup
Use the dial-backup auto-backup command to configure the PPP interface to automatically attempt a
dial-backup upon failure. For more detailed information on PPP dial-backup functionality, refer to the
Functional Notes and Technology Review sections of dial-backup call-mode [answer | answer-always |
originate | originate-answer | originate-answer-always]
Syntax Description
No subcommands.
Default Values
By default, all backup endpoints will automatically attempt dial-backup upon a failure.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 5.1
Usage Examples
The following example enables automatic dial-backup on the endpoint:
(config)#interface ppp 1
(config-ppp 1)#dial-backup auto-backup
61200510L1-35E
Command was introduced.
Command was expanded to include the PPP interface.
Copyright © 2005 ADTRAN
on page 939.
HDLC Command Set
936