ADTRAN 1000R Series Command Reference Manual page 198

Command Reference Guide
show interfaces adsl <slot/port> information [atuc | atur | bit-allocation]
Use the show interfaces adsl command to display information related to the ADSL port.
Syntax Description
<slot/port>
atuc
atur
bit-allocation
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 8.1
Usage Examples
The following example shows sample output for this command:
>enable
#show interfaces adsl 0/1 information
adsl 0/1 line information
adsl 0/1 Local Line Information
Vendor Id:
Serial Number:
Firmware Version:
ADSL Capabilities
adsl 0/1 Remote Line Information
Vendor Id:
Serial Number:
Firmware Version:
ADSL Capabilities
61200510L1-35E
Specifies interface slot and port number.
Shows ADSL interface remote information.
Shows ADSL local information.
Shows ADSL DMT bit-allocation table.
Command was introduced.
4144544E
EngBetaREVC01D
G.DMT, G.LITE, ADSL2, ADSL2+
54535443
00000000
1
G.DMT, G.LITE, ADSL2, ADSL2+
Copyright © 2005 ADTRAN
Enable Mode Command Set
198