ADTRAN 1000R Series Command Reference Manual page 752

Command Reference Guide
ip dhcp [release | renew]
Use the ip dhcp command to release or renew the DHCP IP address. This command is only applicable
when using DHCP for IP address assignment.
Syntax Description
release
renew
Default Values
No default values required for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 3.1
Release 8.1
Usage Examples
The following example releases the IP DHCP address for the ATM sub-interface 1.1:
(config)#interface atm 1.1
(config-atm 1.1)#ip dhcp release
61200510L1-35E
Releases DHCP IP address.
Renews DHCP IP address.
Command was introduced.
ATM sub-interface was added.
Copyright © 2005 ADTRAN
ATM Sub-Interface Config Command Set
752