Command Reference Guide
ADSL Interface Config Command Set
retrain
Use the retrain command to force the modem to retrain.
Syntax Description
No subcommands.
Default Values
No default is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, 4000 Series units.
Command History
Release 8.1
Command was introduced.
Usage Examples
The following example forces a modem retrain:
(config)#interface adsl 0/1
(config-adsl 0/1)#retrain
61200510L1-35E
Copyright © 2005 ADTRAN
563