ADTRAN 1000R Series Command Reference Manual page 773

Command Reference Guide
pvc <VPI/VCI>
Use the pvc command to select the ATM virtual link for this sub-interface. Use the no form of this
command to remove the link.
Syntax Description
>
<VPI/VCI>
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 3000, and 4000 Series units.
Command History
Release 8.1
Usage Examples
The following example sets the VPI to 8 and the VCI to 35:
(config)#interface atm 1.1
(config-atm 1.1)#pvc 8/35
61200510L1-35E
Specifies the ATM network virtual path identifier (VPI) for this PVC and the ATM
network virtual path identifier (VPI) for this PVC. The VPI value range is 0 to 255,
and the VCI value range is 32 to 65,535.
Command was introduced.
Copyright © 2005 ADTRAN
ATM Sub-Interface Config Command Set
773