ADTRAN 1000R Series Command Reference Manual page 916

Command Reference Guide Frame Relay Sub-Interface Config Command Set
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 9.1 Command was introduced.
Usage Examples
The following example configures the Frame Relay sub-interface to receive LLDP packets:
(config)#interface frame-relay 1.16
(config-fr 1.16)#lldp receive
61200510L1-35E Copyright © 2005 ADTRAN 916