ADTRAN 1000R Series Command Reference Manual page 836

Command Reference Guide
ppp chap password <password>
Use the ppp chap password command to configure an alternate password when the peer requires CHAP
PPP authentication. Use the no form of this command to remove a configured password. For more
information on PAP and CHAP functionality, refer to the Technology Review section for the command ppp
authentication [chap | eap | pap]
Syntax Description
<password>
Default Values
By default, there is no defined PPP CHAP password.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1
Release 11.1
Usage Examples
The following example specifies a PPP CHAP password of my_password:
(config)#interface demand 1
(config-demand 1)#ppp chap password my_password
61200510L1-35E
on page 831.
Specifies a password using an alphanumeric string up to 80 characters in length.
Command was introduced.
Command expanded to include the demand interface.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
836