ADTRAN 1000R Series Command Reference Manual page 579

Command Reference Guide
clock rate [auto | bps56k | bps64k]
Use the clock rate command to configure the data rate used as the operating speed for the interface. This
rate should match the rate required by the DDS service provider. Use the no form of this command to
return to the default value.
Syntax Description
auto
bps56k
bps64k
Default Values
By default, the rate is set to auto.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, and 4000 Series units.
Command History
Release 1.1
Functional Notes
When operating at 64 kbps (clear channel operation), the DTE data sequences may mimic network loop
maintenance functions and erroneously cause other network elements to activate loopbacks. Use the
data-coding scrambled command to prevent such occurrences. See
for related information.
Usage Examples
The following example configures the clock rate for 56 kbps operation:
(config)#interface dds 1/1
(config-dds 1/1)#clock rate bps56k
61200510L1-35E
Automatically detects the clock rate and sets to match.
Sets the clock rate to 56 kbps.
Sets the clock rate to 64 kbps.
Command was introduced.
Copyright © 2005 ADTRAN
DDS Interface Configuration Command Set
data-coding scrambled on page 581
579