ADTRAN 1000R Series Command Reference Manual page 221

Command Reference Guide
show ip dhcp-server binding <client ip address>
Use the show ip dhcp-server binding command to display the Dynamic Host Client Protocol (DHCP)
server client table with associated information.
Syntax Description
<client ip address>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1
Usage Examples
The following is a sample output from the show ip dhcp-server binding command:
>enable
#show ip dhcp-server binding
IP Address Client Id
10.100.23.64 01:00:a0:c8:00:8f:b3 Aug 15 2002 11:02 AM
61200510L1-35E
Optional. Specifies a particular client IP address.
Command was introduced.
Lease Expiration
Copyright © 2005 ADTRAN
Enable Mode Command Set
Client Name
Router
221