Table of Contents
Advertisement
Chapter 4. Front Panel Operation and Menu Structure
Set Passcode (Front Panel)
The Set Passcode option provides security for front panel access. You can change
or set the front panel passcode at any time or eliminate it altogether through the
Set Passcode option. By default, the front panel does not have a passcode.
The passcode can only be entered by using numbers (any number except zero).
After entering the desired passcode, press Enter. The prompt Verify Passcode
displays. Enter the passcode again and press Enter.
Set a null passcode by pressing 0 and then pressing Enter. When the Verify Pass-
word prompt displays, press 0 and Enter again. A null passcode grants unlimited
access to front panel options.
Password Reset
You can create a list of system passwords with the terminal menus (see "Access
Passwords" on page 5-16 for details). If you forget the password and are unable to
log in to the terminal menus, use the Password Reset option. When you select this
option, two items display in the LCD window: CHALLENGE # and
RESPONSE #.
Call ADTRAN technical support, and tell them the challenge number. They use
this to generate a random response number. Enter this response number in the
RESPONSE # field, and ATLAS_800
tem password list. You can then use the new default password to log into the ter-
minal menus.
4-8
Show Results
This option displays the types of tests performed during a self-test, as well as
the results of the tests. Each item in the list displays either Passed or Failed.
The following items display:
Test...
Checks this...
NVRAM
Non-volatile RAM
DSP RAM
Digital signal processor RAM
RTC RAM
Real time clock RAM
TDM MAP
TDM time slot mapping RAM
DRAM
Dynamic program memory used for program execution
Slot 1—8
Data path test to individual modules
A RAM test failure indicates a controller board problem. If a slot fails, the
module in the slot may have a problem,
Clear Results
This option resets the self-test log that you access with the Show Results
option. When you select this option, the message Self-Test Log Clearing dis-
plays. After the command is finished executing, the message Self-Test Log
Cleared displays.
If you clear the message log, you cannot retrieve the data.
PLUS
_
ATLAS
800
PLUS
inserts a default password into the sys-
User Manual
61200226L1-1
Advertisement
Table of Contents
