Tftp - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

4.4.4.2

TFTP

Loading and saving data using a TFTP server
On this page, you can configure the TFTP server and the file names. The WBM also allows
you to store device data in an external file on your client PC or to load such data from an
external file from the PC to the devices. This means, for example, that you can also load new
firmware from a file located on your Admin PC.
On this page, the certificates required to establish a secure VPN connection can also be
loaded.
Note
Configuration files and trial mode/Automatic Save mode
In Automatic Save mode, the data is saved automatically before the configuration files
(ConfigPack and Config) are transferred.
In Trial, although the changes are adopted, they are not saved in the configuration files
(ConfigPack and Config). Use the "Write Startup Config" button on the "System >
Configuration" WBM page to save changes in the configuration files.
Description
The page contains the following boxes:
● "TFTP Server IP Address" input box
Enter the IP address of the TFTP server with which you exchange data.
● "TFTP Server IP Port" input box
Enter the port of the TFTP server over which data exchange will be handled. If
necessary, you can change the default value 69 to your own requirements.
SCALANCE S615 Web Based Management
Configuration Manual, 05/2015, C79000-G8976-C388-02
Configuring with Web Based Management
4.4 "System" menu
73