Show Vlan Private-Vlan; Show Vlan Protocols-Group - Siemens SCALANCE XM-400 Configuration Manual

Result
The information about the ports is displayed.
6.1.1.12

show vlan private-vlan

Description
This command shows the specific information for all or for a selected private VLAN type.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vlan private-vlan [pvlan-type]
The parameter has the following meaning:
Parameter
pvlan-type
If you do not select any parameter from the parameter list, the entries of all available types
are displayed.
Result
The information for the selected private VLAN type is displayed.
Further notes
You define a private VLAN type
6.1.1.13

show vlan protocols-group

Description
This command displays the table with the protocol group entries.
SCALANCE XM-400/XR-500 Command Line Interface (CLI)
Configuration Manual, 06/2016, C79000-G8976-C252-11
or
cli#
Description
Shows brief information about all
VLANs
command.
private-vlan
Network structures
6.1 VLAN
Range of values / note
primary
isolated
community
189