Default Log Monitor - Allied Telesis AR2050V Command Reference Manual

L C
OGGING OMMANDS

DEFAULT LOG MONITOR

default log monitor
Overview This command restores the default settings for log messages sent to the terminal
when a
default log monitor
Syntax
Default All messages are sent to the terminal when a
Mode Global Configuration
Example To restore the log monitor to its default settings use the following commands:
awplus#
awplus(config)#
Related log monitor (filter)
Commands
log monitor exclude
show log config
terminal monitor
C613-50186-01 Rev B
terminal monitor command is used.
configure terminal
default log monitor
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
terminal monitor command is used.
284