Log Buffered Exclude - Allied Telesis AR2050V Command Reference Manual

L C
OGGING OMMANDS

LOG BUFFERED EXCLUDE

log buffered exclude
Overview Use this command to exclude specified log messages from the buffered log. You
can exclude messages on the basis of:
•
•
•
•
•
Use the no variant of this command to stop excluding the specified messages.
log buffered exclude [level <level>] [program <program-name>]
Syntax
[facility <facility>] [msgtext <text-string>]
no log buffered exclude [level <level>] [program
<program-name>] [facility <facility>] [msgtext <text-string>]
Parameter Description
level
Exclude messages of the specified severity level.
<level>
The severity level to exclude. The level can be specified as one of the following numbers or
level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
program
Exclude messages from a specified program.
<program-
The name of a program. Either one of the following predefined program names (not
name>
case-sensitive), or another program name (case-sensitive) that you find in the log output.
rip
ripng
ospf
ospfv3
bgp
rsvp
C613-50186-01 Rev B
the priority/severity of the message
the program that generated the message
the logging facility used
a sub-string within the message, or
a combination of some or all of these.
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
Routing Information Protocol (RIP)
Routing Information Protocol - next generation (RIPng)
Open Shortest Path First (OSPF)
Open Shortest Path First (OSPF) version 3 (OSPFv3)
Border Gateway Protocol (BGP)
Resource Reservation Protocol (RSVP)
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
290