Figure 2-1 Networking Diagram For Configuring Basic Igmp Functions - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Networking Requirements
On the network as shown in
to implement multicast on the network to enable hosts to receive the Video On Demand (VOD)
information.
When the hosts connected to a certain interface need to receive a popular program for a long
time, you can add the interface to a multicast group statically. As shown in the following figure,
if HostA needs to receive the multicast data from the multicast group 225.1.1.1 for a long time,
you need to add GE 1/0/0 on the S9300-A to the multicast group 225.1.1.1 statically.

Figure 2-1 Networking diagram for configuring basic IGMP functions

PIM network
Switch
S9300-A
S9300-B
S9300-C
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
Issue 01 (2009-07-28)
Figure
S9300-A
GE2/0/0
S9300-B
GE2/0/0
S9300-C
GE2/0/0
Physical interface
GE 1/0/0
GE 2/0/0
GE 1/0/0
GE 2/0/0
GE 1/0/0
GE 2/0/0
Enable multicast on all S9300s providing multicast services.
Enable PIM-SM on all the interfaces on S9300.
Enable IGMP on the interfaces on hosts side.
Add VLANIF 10 on S9300-A to the multicast group 225.1.1.1 statically.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-1, the unicast routing function is normal. You are required
Ethernet
GE1/0/0
GE1/0/0
GE1/0/0
Ethernet
VLANIF interface
VLANIF 10
VLANIF 11
VLANIF 20
VLANIF 21
VLANIF 30
VLANIF 31
2 IGMP Configuration
HostA
Receiver
N1
HostB
Leaf network
HostC
Receiver
N2
HostD
IP address
10.110.1.1/24
192.168.1.1/24
10.110.2.1/24
192.168.2.1/24
10.110.3.1/24
192.168.3.1/24
2-21