Checking The Configuration; Configuring A Threshold For The Nqa Alarm; Establishing The Configuration Task - Huawei AR150/200 Series Configuration Manual

Enterprise routers
Table of Contents

Advertisement

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
l To perform the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss
l To perform the NQA test after a certain delay period, run the start delay { seconds second
----End

6.17.8 Checking the Configuration

After configuring the system to send test results to the FTP server, you can view the
configuration.
Prerequisites
The configurations of the Test Results to Be Sent to the FTP Server function are complete.
Procedure
Step 1 Run the display nqa-ftp-record configuration command to Check the configuration for saving
NQA test results.
----End
Example
Run the display nqa-ftp-record configuration command to check the configuration for saving
NQA test results.
<Huawei> display nqa-ftp-record configuration
---------------NQA FTP SAVE RECORD CONFIGURATION---------------

6.18 Configuring a Threshold for the NQA Alarm

This section describes how to set an alarm threshold for test results. When the number of test
results exceeds the threshold, a trap message is sent to the NMS for notification.

6.18.1 Establishing the Configuration Task

Before setting an alarm threshold for test results, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Issue 02 (2012-03-30)
The test instance is started immediately.
[ end { at [ yyyy/mm | dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
FUNCTION: ENABLE
TRAP: DISABLE
IP-ADDRESS:11.1.1.8
VPN-INSTANCE:
USERNAME:wang
PASSWORD:123
FILENAME:icmp
ITEM-NUM:10010
TIME:2
LAST FINISHED FILENAME:icmp20080605-150350.txt
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
196

Advertisement

Table of Contents
loading

Table of Contents