Quidway S9300 Terabit Routing Switch
Configuration Guide - IP Service
----End
3.4 Configuration Examples
This section provides several configuration examples of IP performance.
3.4.1 Example for Disabling the Sending of ICMP Redirection Packets
3.4.2 Example for Configuring ICMP Host Unreachable Packets
3.4.3 Example for Optimizing System Performance by Discarding Certain ICMP Packets
3.4.1 Example for Disabling the Sending of ICMP Redirection
Packets
Networking Requirements
As shown in
and S9300-C are required and these devices are connected through their GE interfaces.
Figure 3-1 Networking diagram for disabling the sending of ICMP redirection packets
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Issue 02 (2009-08-06)
socket-id ] [ verbose verbose-number ] command in the user view to debug RAWLINK
packets.
Figure
3-1, to limit the sending of ICMP redirection packets, S9300-A, S9300-B,
GE1/0/0
VLANIF10
2.2.2.2/24
GE1/0/0
S9300C
Assign IP addresses to interfaces on routing devices.
Configure static routes to indirectly connected devices.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
S9300A
VLANIF10
1.1.1.1/24
Internet
VLANIF10
1.1.1.2/24
GE1/0/0
3 IP Performance Configuration
S9300B
3-11