Configuring Universal Nqa Test Parameters - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Context
Procedure
l
l
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
<Huawei> display nqa results test-instance admin jitter
NQA entry(admin, jitter) :testflag is inactive ,testtype is jitter
1 . Test 2 result

6.13 Configuring Universal NQA Test Parameters

This section describes how to set and use universal parameters for NQA test instances.
Issue 02 (2012-03-30)
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Run the display nqa results [ test-instance admin-name test-name ] command to view the
test results on the NQA client.
Run the display nqa-server command to view the information about the NQA server.
The test is finished
SendProbe:60
Completion:success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/1/1/60
NumOfRTT:60
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:1
Max Positive SD:1
Positive SD Number:15
Positive SD Sum:15
Positive SD Square Sum:15
Min Negative SD:1
Max Negative SD:1
Negative SD Number:15
Negative SD Sum:15
Negative SD Square Sum:15
Min Delay SD:0
Avg Delay SD:0
Max Delay SD:0
Delay SD Square Sum:27
Packet Loss SD:0
Packet Loss Unknown:0
Average of Jitter SD:1
jitter out value:0.0312500
NumberOfOWD:60
OWD SD Sum:27
ICPIF value: 0
TimeStamp unit: ms
Packet Rewrite Ratio: 0%
Packet Disorder Ratio: 0%
Fragment-disorder Ratio: 0%
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:60
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:60
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:1
Max Positive DS:1
Positive DS Number:1
Positive DS Sum:1
Positive DS Square Sum:1
Min Negative DS:1
Max Negative DS:1
Negative DS Number:1
Negative DS Sum:1
Negative DS Square Sum:1
Min Delay DS:0
Avg Delay DS:0
Max Delay DS:0
Delay DS Square Sum:1
Packet Loss DS:0
Average of Jitter:1
Average of Jitter DS:1
jitter in value:0.0020833
Packet Loss Ratio: 0%
OWD DS Sum:1
MOS-CQ value: 0
Packet Rewrite Number: 0
Packet Disorder Number: 0
Fragment-disorder Number: 0
6 NQA Configuration
176