Configuring The Ftp Upload Test; Establishing The Configuration Task - Huawei AR150/200 Series Configuration Manual

Huawei AR150&200 Series Enterprise Routers
Configuration Guide - Network Management
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
l
l
l
<Huawei> display nqa results
NQA entry(admin, ftp) :testflag is inactive ,testtype is ftp
1 . Test 1 result

6.5 Configuring the FTP Upload Test

This section describes how to configure an FTP upload test to check the FTP upload performance.

6.5.1 Establishing the Configuration Task

Before configuring an FTP upload test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
In an FTP upload test, the local device functions as an FTP client, intending to upload the
specified file to an FTP server.
The test result contains the statistics about each FTP phase, including the time to set up an FTP
control connection and the time to transport the data.
In an FTP upload test, you can specify the file to be uploaded or the bytes to be uploaded. If
certain bytes are specified, the FTP client then automatically generates the test files for
uploading.
Pre-configuration Tasks
Before configuring the FTP upload test, complete the following tasks:
l
Issue 02 (2012-03-30)
CtrlConnTime: indicates the time when the connection is established.
DataConnTime: indicates the duration of data transmission.
SumTime: indicates the duration of the FTP operation.
The test is finished
SendProbe:1
Completion :success
MessageBodyOctetsSum: 448
Operation timeout number: 0
Drop operation number:0
CtrlConnTime Min/Max/Average: 438/438/438
DataConnTime Min/Max/Average: 218/218/218
SumTime Min/Max/Average: 656/656/656
Average RTT:380
Lost packet ratio: 0 %
Configuring the FTP user name and password and the login directory
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
ResponseProbe:1
RTD OverThresholds number: 0
Stats errors number: 0
System busy operation number:0
Disconnect operation number: 0
151