HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
The system view is displayed.
Step 2 Run:
ftp
The port number of the FTP server is configured.
If a new number of a monitored port is configured, the FTP server interrupts all the FTP
connections and monitors the port of the new number.
----End
6.3.4 Enabling the FTP Server
Before using FTP to perform file operations, you need to enable the FTP sever on the router.
Context
By default, the FTP server is disabled on the router. Therefore, you must enable the FTP server
before using FTP.
Do as follows on the router that serves as the FTP server:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ftp
The FTP server is enabled.
----End
6.3.5 (Optional) Configuring the FTP Server Parameters
The FTP server parameters include the source address of the FTP server and the timeout period
for FTP connection.
Context
l
l
Do as follows on the router that serves as the FTP server:
Issue 02 (2011-09-10)
[ ipv6 ] server port port-number
[ ipv6 ] server enable
NOTE
When the file operation between clients and the router ends, run the
disable the FTP server function. This ensures the security of the router.
You can configure a source IP address for the FTP server. This limits the destination address
that the client can access and therefore guarantee the security.
You can configure the timeout period for FTP connections on the FTP server. When the
timeout period of an FTP connection expires, the system breaks the connection to release
resources.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Managing File System
undo ftp
[ ipv6 ] server command to
114