Optional) Implementing 802.1Ag Mac Ping - Huawei NetEngine80E Configuration Manual - Reliability

Hide thumbs Also See for NetEngine80E:
Table of Contents

Advertisement

HUAWEI NetEngine80E/40E Router
Configuration Guide - Reliability
No.
4
5

8.8.2 (Optional) Implementing 802.1ag MAC Ping

By performing the 802.1ag MAC ping, you can detect connectivity between MEPs or between
MEPs and MIPs within an MA.
Context
Similar to the ping operation, 802.1ag MAC ping checks whether the destination device is
reachable by sending test packets and receiving response packets. In addition, the ping operation
time can be calculated at the transmitting end for network performance analysis.
Procedure
Step 1 Do as follows on the router with a MEP at one end of the link to be tested.
1.
2.
3.
4.
----End
Issue 02 (2011-09-10)
Data
(Optional) VLAN to which the destination node belongs
(Optional) Name of the PBB-TE tunnel
Run:
system-view
The system view is displayed.
Run:
cfm md
md-name
The MD view is displayed.
Run:
ma
ma-name
The MA view is displayed.
Run:
ping mac-8021ag
mep mep-id mep-id mac mac-address | remote-mep mep-id mep-id }
[ -c count | interface interface-type interface-number | -s packetsize | -t
timeout ] *
The connectivity between a MEP and a MEP or a MIP on other devices is tested.
When implementing 802.1ag MAC ping, ensure that:
l The MA is associated with a VLAN.
l The MEP is configured in the MA.
l If the outbound interface is specified, it cannot be configured with an inward-facing
MEP. The interface must be added to the VLAN associated with the MA.
l If the destination node is a MEP, either mac mac-address or remote-mep mep-id mep-
id can be selected. If remote-mep mep-id mep-id is selected, the RMEP must already
be created with the
remote-mep
l If the destination node is a MIP, select mac mac-address.
The intermediate device on the link to be tested only forwards LBMs and LBRs. In this
manner, the MD, MA, or MEP are not required to be configured on the intermediate device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Ethernet OAM Configuration
command and the MAC address of the RMEP.
423

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netengine40e

Table of Contents