Table of Contents
Advertisement
HUAWEI NetEngine5000E Core Router
Configuration Guide - System Management
Step 2 Run:
system-view
The system view is displayed.
Step 3 Run:
clock timezone time-zone-name { add | minus } offset
The time zone is set.
l To obtain the time of the time zone, you can add offset to the UTC standard time if add is
l To obtain the time of the time zone, you can minus offset from the UTC standard time if
Step 4 Run:
clock daylight-saving-time time-zone-name one-year start-time start-date end-time end-date
offset
or,
clock daylight-saving-time time-zone-name repeating start-time { { first | second | third |
fourth | last } weekday month | start-date } end-time { { first | second | third | fourth | last }
weekday month | end-date } offset [ start-year [ end-year ] ]
The daylight saving time is set.
----End
Checking the Configuration
Run the display clock command to display the system time.
<HUAWEI> display clock
2010-07-20 10:04:21
Tuesday
Time Zone
2.6 Maintaining NTP
This section describes how to maintain NTP. Maintaining NTP helps you to monitor the NTP
operating status.
2.6.1 Monitoring the NTP Running Status
By running the display command, you can monitor the operation of NTP.
Context
In routine maintenance, you can run the following commands in any view to monitor the NTP
running status.
Issue 01 (2011-10-15)
specified in the command.
minus is specified in the command.
: Default Zone Name add 00:00:00
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 NTP Configuration
34
Advertisement
Table of Contents
