One-Shot Mode; Settings For One-Shot Mode - Renesas 7700 FAMILY User Manual

A-D CONVERTER

8.6 One-shot mode

8.6 One-shot mode
In the one-shot mode, the operation for the input voltage from the one selected analog input pin is performed
once, and an A-D conversion interrupt request occurs when the operation is completed.

8.6.1 Settings for one-shot mode

Figure 8.6.1 shows an initial setting example of the one-shot mode.
When using an interrupt, it is necessary to set the corresponding register to enable interrupts. Refer to
"Chapter 4. INTERRUPTS" for more descriptions.
8–16
7751 Group User's Manual