Memory card adaptor
The memory card adaptor is used to convert the CF card into the memory card (Type II).
The memory card (Type II) is used to transmit the OS, project data and to save the data of alarm history
function or other functions by installing it to the PC which is equipped with the PCMCIA interface.
Refer to the following for the details related to CF card.
Fit the memory card in the memory card adaptor.
Option function board
Power OFF the GOT.
Remove the extension unit cover (Interface 1 side) of GOT rear face.
Install the option function board in the option function board interface.
(When the extension unit is installed in GOT, remove the installed extension unit. And, do not
touch the board in the GOT when install the option function board.)
7.3.2 Installation procedure
Precautions for removing CF card
(1) Do not insert or eject a CF card, and do not turn off the GOT while the CF card
access LED turns on.
Failure to do so might cause a data damage in the CF card and a malfunction with
the CF card unit.
(2) When a CF card is removed from the CF card unit, support the card with the hand,
because the card might pop out.
Failure to do so might cause the CF card to drop from the unit, resulting in a
damage or failure of the card.