When The Coreos Cannot Be Installed - Mitsubishi Electric GT14 User Manual

16.5.2 When the CoreOS cannot be installed

When the CoreOS cannot be installed, confirm the following item.
If the CoreOS cannot be installed even after checking the following item, the error may be caused by a hardware failure.
Please consult your local Mitsubishi (Electric System) Service center or representative.
The CoreOS installation is not executed even when installing the SD
card in the GOT.
GOT error.
Contact your local sales office.
SD card error.
Check whether the SD card can be used.
Installation will be cancelled.
The message
GOT type and OS version do not match.
is displayed
Installation will be cancelled.
on the GOT
The version of OS is not acceptable to this GOT.
Installation will be cancelled.
Confirm the version of OS.
Memory card access switch is off.
Installation will be cancelled.
Turn on the switch and restart the GOT.
16. INSTALLATION OF COREOS, BOOTOS AND STANDARD MONITOR OS
Error Action
(1) Check whether the SD card access switch of the GOT is on.
If the switch is off, switch it on.
(2) The writing from the GT Designer3 to the SD card may not have been
completed normally.
Execute the writing from the GT Designer3 to the SD card again.
The GOT main unit is broken.
Please consult your local Mitsubishi (Electric System) Service center or
representative.
The SD card is defective.
(1) Format the SD card and re-execute.
(2) Replace the SD card.
The GOT type selected at [Core OS write] of the GT Designer3 is not correct.
Confirm the GOT type and perform [Core OS write] again.
Install CoreOS from the latest GT Designer3.
The SD card access switch is off. Turn the switch on and restart the GOT.
16 - 13
16.5 CoreOS
9
10
11
12
13
14
15
16