Handling Of Grip Switch (Excluding Rh Model); Function Of Grip Switch; Setting In Main Unit And Screen Creation Software - Mitsubishi Electric F920GOT-K Hardware Manual

GOT-F900 SERIES (CONNECTION)
5.11

Handling of grip switch (excluding RH model)

Because the grip switch executes communication with connected equipment, wiring is not required.
5.11.1

Function of Grip Switch

The grip switch is provided on the side of the Handy GOT. While the grip switch (N/O contact type) is
being pressed manipulation of the touch keys on the screen is effective.
The ON/OFF status of the grip switch can be monitored by the PLC.
In the OS version 6.00 or later, you can select handling of the grip switch and the LED control method.
5.11.2

Setting in main unit and screen creation software

Make the grip switch valid or invalid in "SET-UP MODE" of the Handy GOT or the screen creation
software. (The priority is given to writing in the screen creation software.) (The default value is "USE"
(valid).)
In the OS version 6.00 or later, if the grip switch is set valid, the touch key OFF operation can be
changed by the grip switch as described in "3) Switch OFF operation" in the next section. (For the
details, refer to the next page.)
For the detailed setting procedure, refer to section 5.14.
1) Setting in the main unit
When the OS version is 6.00 or later
Set the grip switch valid ("USE") or invalid ("DON'T USE") in "HANDY GOT SETTING" in "SET-UP
MODE".
HANDY GOT SETTING
GRIP SWITCH:
PUSH BUTTON WRITE: DOES NOT WRITE
SWITCH OFF ACTION:
TOUCH SWITCH OFF
LED ACTION:
CONCURRENTLY WITH GRIP SWITCH
END
USE
Installation and Wiring of Handy GOT 5
Grip switch
When using the grip switch, press
the screen to display "USE".
These items are added in the OS
version 6.00. For the details,
refer to the next section.
5-40