Display And Operation Settings (Got Set Up); Got Main Unit Function Settings; Time Setting - Mitsubishi Electric GT1695M-XTBD User Manual

9. DISPLAY AND OPERATION
SETTINGS (GOT SET UP)
Setting screen for display and setting screen for operation can be displayed from the GOT utility screen.
In the setting screen for display and the setting screen for operation, the following settings can be set.
Item

Time setting

Transparent mode
Clean
Video/RGB Setting
Multimedia setting
Display
Operation
GOT maintenance

9.1 GOT Main Unit Function Settings

9.1.1 Time setting
1 Time setting functions
Time setting and displaying of the status of GOT built-in battery are possible.
Item
Time setting
Clock display
GOT internal battery
voltage status
Clock setting, clock display, GOT internal battery voltage status
Ch No.
Cleaning the display section
Video unit, video display, RGB display
Multimedia equipment, video display
Language, opening screen time, screen save time, screen save backlight,
battery alarm display, sensor detect level, sensor detect time
Adjusting the brightness and contrast
Buzzer volume, window move buzzer volume, Key sensitivity, Key
reaction speed, Touch detection mode
Security setting
Utility call key
Touch panel calibration
Maintenance timing setting
Addition times reset
GOT start time
Setup the method to adjust the time between GOT clock data and clock
data of controller connected to the GOT.
Carry out the display and setup of GOT clock data.
Displays GOT internal battery voltage status.
Description
Description
9.1 GOT Main Unit Function Settings
9.1.1 Time setting
9
10
Reference
page
9-1
9-7 11
9-9
9-11
9-20
9-32
12
9-41
9-43
9-48
9-50
9-53
13
9-56
9-59
9-61
14
15
Reference
page
9-3
16
9-5
9-6
9
- 1