Display operation of main menu
The following three types of operation can display the main menu.
(Display the main menu after installing the basic OS from GT Designer2 to the GOT built in flash memory.)
(1) When project data is undownloaded
If the power supply of GOT turns ON, the main menu is displayed automatically after title display.
GOT power supply ON
(2) When touching menu call key
If you touch the menu call key while user-created screen is displayed, the main menu is displayed.
The menu call key can be set by the GOT utility or GT Designer2.
(The menu call key is set in the position as described below at factory shipment.)
Menu call key
1-point touch on the upper-left corner
Default setting at factory shipment
1-point press on the GOT screen upper left corner
8.3 Utility Display
8.3.1 Display operation of main menu