10.4 Operation Procedures
This section describes the backup/restoration display details and the functions of the keys displayed on the screen.
10.4.1
Main menu
The following describes the display and the key functions on the Bakcup/restoration function : Main menu screen.
■1. Display details
No.
1)
Displays the target channel No. of the backup and the setting name for the backup/restoration (Fixed).
■2. Key functions
Key
[Next chnnl]
[Device list]
[Backup function]
[Restoration function]
[GOT data package]
[Delete backup data]
[Close]
[FX keyword]
1)
Switches the target channels of the backup/restoration.
Available when the controller list file is stored in the same folder as the backup setting.
➠
10.3.4 Network batch backup/restoration
Shifts to the controller list screen.
If a SD card which stores the controller list file is installed on the GOT after displaying the
Main Menu or switching a channel, the [Device List] button is not valid.
To validate the [Device List] button, switch a channel and select the same channel again.
Starts the backup.
Switches the screen to the Restoration function: Data list screen.
Switches the screen to the setting screen of the GOT data package acquisition.
➠
GOT2000 Series User's Manual (Utility)
Deletes the oldest data among backup data already stored in a SD card or USB memory in
the GOT.
Ends the backup/restoration, and then the screen is switched to the backup/restoration
startup screen.
Displays the FX keyword screen.
(This key is displayed only when the FXCPU is connected.)
For the operation of a keyword including disabling a keyword, refer to the following
manual.
➠
GOT2000 Series User's Manual (Utility)
Display details
Function
10.4 Operation Procedures
10
10 - 43