Plc Side Setting - Mitsubishi Electric GOT2000 Series Connection Manual

2.5

PLC Side Setting

■1. Directly connecting to the CPU
*1*2*3
Transmission speed
Station No.
Data bit
Stop bit
Parity bit
Control Method
Communication format
Sum check
Protocol
*1
*2
*3
■2. Connecting to the intelligent serial port module
(1) For transmission control procedure1
Transmission speed
Station No.
Data bit
Stop bit
Parity bit
Control Method
Communication format
Sum check
(2) For transmission control procedure2
Transmission speed
Station No.
Data bit
Stop bit
Parity bit
Control Method
Communication format
Sum check
2 - 10
2.5 PLC Side Setting
POINT POINT POINT
HITACHI IES PLC
For details of the HITACHI IES PLC, refer to the following manual.
➠
HITACHI IES PLC user's Manual
Item
Indicates only the transmission speeds that can be set on the GOT side.
The transmission speed setting must be consistent with that of the GOT side.
For the transmission speed setting on the GOT side, refer to the following.
➠
2.4.2 Communication detail settings
The setting range varies with the connected PLC.
Item
Item
Set value
4800bps, 9600bps, 19200bps, 38400bps
0
7bit
1bit
Even
DTR control
RS-232
Done
transmission control procedure 1
Set value
19200bps
0
7bit
1bit
Even
None
For RS-232 communication: RS-232 MODE switch 2
For RS-422 communication: RS-422 MODE switch 2
Done
Set value
19200bps
0
7bit
1bit
Even
None
For RS-232 communication: RS-232 MODE switch 9
For RS-422 communication: RS-422 MODE switch 9
Done