No Snmp User; Snmp View - Siemens SCALANCE XC-200 Configuration Manual

Network protocols
7.5 SNMP
Result
The details of the SNMP user are configured.
Further notes
You delete the settings with the no snmp user command.
You display the configured users with the show snmp user command.
7.5.2.21

no snmp user

Description
With this command, you delete the details of an SNMP user.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no snmp user <UserName>
The parameter has the following meaning:
Parameter
UserName
Result
The details of the SNMP user are deleted.
Further notes
You change the settings with the snmp user command.
You display the configured users with the show snmp usercommand.
7.5.2.22

snmp view

Description
With this command, you configure an SNMP view.
348
Description
Name of the user
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Range of values / note
max. 32 characters
Configuration Manual, 07/2017, C79000-G8976-C361-06