No Snmp User; Snmp View - Siemens SCALANCE XM-400 Configuration Manual

Simatic net industrial ethernet switches command line interface

Hide thumbs Also See for SCALANCE XM-400:

Table of Contents

Network protocols

no snmp user

With this command, you delete the details of an SNMP user.

You are in the Global configuration mode.

The command prompt is as follows:

cli(config)#

Call up the command with the following parameters:

no snmp user <UserName>

The parameter has the following meaning:

The details of the SNMP user are deleted.

Further notes

You change the settings with the

You display the configured users with the

With this command, you configure an SNMP view.

● An SNMP group has been created

● The access to the group is configured with

You are in the Global Configuration mode.

The command prompt is as follows:

Name of the user

show snmp user

SCALANCE XM-400/XR-500 Command Line Interface

Configuration Manual, 05/2014, C79000-G8976-C252-07

Range of values

max. 32 characters

Scalance xr-500