Configure Snmpv3 Add Filter-Profile - Extreme Networks ExtremeWare XOS Command Reference Manual

ExtremeWare XOS 11.5 supports only the Summit X450 family of switches and the BlackDiamond 8800 series switch.

configure snmpv3 add filter-profile

configure snmpv3 add filter-profile [[hex <hex_profile_name>] |
<profile_name>] param [[hex <hex_param_name>]] | <param_name>] {volatile}
Description
Associates a filter profile with a parameter name.
Syntax Description
hex_profile_name
profile_name
hex_param_name
param_name
volatile
Default
The default storage type is non-volatile.
Usage Guidelines
Use this command to add an entry to the snmpNotifyFilterProfileTable. This table associates a filter
profile with a parameter name. The parameter name is associated with target addresses, and the filter
profile is associated with a series of filters, so, in effect, you are associating a series of filters with a
target address.
Example
The following command associates the filter profile prof1 with the parameter name P1:
configure snmpv3 add filter-profile prof1 param P1
History
This command was first available in ExtremeWare XOS 10.1.
The and
hex_profile_name
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.5 Command Reference Guide
Specifies the filter profile name. The value is to be supplied as a colon
separated string of hex octets.
Specifies the filter profile name in ASCII format.
Specifies a parameter name to associate with the filter profile. The value to
follow is to be supplies as a colon separated string of hex octets.
Specifies a parameter name to associate with the filter profile in ASCII format.
Specifies volatile storage.
parameters were added in ExtremeWare XOS 11.0.
hex_param_name
configure snmpv3 add filter-profile
135