Fast Facility Protection Group Management - Alcatel-Lucent 1850 User Provisioning Manual

Menu bar
............................................................................................................................................................................................................................................................
Figure 3-64 LinearMSP
The LinearMSP displays the Filter by panel that contains the following parameter:
– Signal - The values are:
The Search is used to filter the signal types.
The Create link is used to configure a new LinearMSP. See
(p. 5-49).
1:1 Tunnel protection
The 1:1 Tunnel Protection displays the following as shown in
Figure 3-65 Fast facility protection group management
The Fast Facility Protection Group Management tab displays the following:
The Create link is used to configure a new Fast Facility Protection Group. See Create Fast
Facility Protection Group. See
............................................................................................................................................................................................................................................................
3 - 70
• ALL
• STM1
• STM4
• STM16
• STM64
"Create 1:1 tunnel protection" (p. 5-52).
Protection menu
"Create linear MSP"
Figure 3-65.
8DG08763KAAA
Issue 1 February 2009