From a magneto optical disk
Use the Magneto Optical to S87x0 Translations (MOST) Tool to transfer translation files from a
magneto optical disk to an Avaya S8700-Series Media Server. Use this tool only when you
migrate call processing translations on a DEFINITY Server R to an Avaya S8700-Series Media
Server.
The MOST tool is not shipped with each system but might be available locally.
The MOST tool that you use with the S8710 or S8720 Media Server consists of:
An external Magneto Optical drive
●
A USB cable
●
Ordering information
Comcode
700355415
!
CAUTION:
When creating the optical disk that is used to move translations from the source
CAUTION:
system to the S8700-Series Media Server, there are specific steps that must be
followed. For more information, see
Prerequisites
This section provides those tasks that must be completed prior to starting the migration.
This section covers the following tasks:
Presite checklist
●
site.
Additional tasks
●
starting the migration from an existing DEFINITY system.
Presite migration checklist
●
going on site.
Description
Magneto Optical Server to S8710 Translations (with
USB cable)
on page 744 - these are tasks that must be performed before going on
on page 746 - these are tasks that must be performed on site before
on page 751 - these are tasks that must be completed before
Presite migration checklist
Prerequisites
on page 751.
Issue 2.1 June 2006
743