Avaya S8100 Series Manual page 1170

Installing or converting to an S8500 LSP
Note:
If the hard drive on the S8500 has a version of Communication Manager
Note:
installed, you see the following screen:
If this screen appears, select Yes on the screen. You want to repartition the hard disk
and remove the existing software and translations. Then continue as with a normal
new installation.
4. The Select Release Version screen is displayed. Ensure that the Build line and <OK> is
highlighted.
5. Press Enter to partition the hard disk drive and reformat the partitions.
Once the drive is properly configured, the program starts the installation process and
reports on progress made.
These processes can take up to 20 minutes. When the media server is ready to reboot, the
CD-ROM drive drawer opens. You must remove the CD from the drive at this time.
The reboot can take up to 3 minutes. The telnet session drops automatically.
1170 Upgrading, Migrating, and Converting Media Servers and Gateways