Migrating a DEFINITY Server SI in an MCC to an S8700-Series Media Server with Fiber-PNC
Figure 47: Ribbon cable connector
6. Push the tabs on the ends of the connector inward to lock the connector in place.
7. Thread the ribbon through the slot on the front panel. See
connection
two media servers.)
8. Insert the TN775D Maintenance circuit pack part way into the MAINTENANCE slot.
9. Attach the other end of the short ribbon cable to the top connector on the component side of
the TN775D circuit pack. The red line is on the bottom. See
connection
718 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 719. (Duplex reliability in the S8700 Series configuration consists of the
on page 719.
caxxinst LJK 022002
Duplex reliability ribbon cable
Duplex reliability ribbon cable