Avaya S8100 Series Manual page 755

Note:
You must install the new Communication Manager license file on the media
Note:
server before you make the change or the system will not run.
Perform the following tasks to convert a processor port network to a port network (MCC).
Premigration administration:
Connecting to the processor
●
Verifying administration and system status
●
Recording all busyouts
●
Recording node names and IP addresses
●
Saving translations
●
Migration tasks:
Accessing the media server maintenance web interface
●
Checking system status
●
Verifying the license file
●
Transferring translations
●
Disconnecting from the active media server
●
Connecting to the standby media server
●
Disconnecting from the standby media server
●
Connecting to the active media server
●
Copying translation files from the MO disk to the active S8700-Series Media Server
●
page 767
Disconnecting from the active media server
●
Connecting to the standby media server
●
Disconnecting from the standby media server
●
Connecting to the active media server
●
Installing the translations
●
Restoring data for a migration
●
Adding IPSI translations to Communication Manager
●
Setting IPSI duplication (high-reliability critical-reliability only)
●
Adding IPSI information
●
Setting the alarm activation level
●
Backing up translations
●
on page 762
on page 763
on page 764
on page 765
on page 765
on page 766
on page 766
on page 767
on page 770
on page 770
on page 770
on page 771
on page 775
on page 775
on page 776
on page 763
on page 764
on page 765
on page 766
on page 766
on page 769
on page 770
on page 773
on page 774
Migration tasks
on
Issue 2.1 June 2006 755