Avaya S8100 Series Manual page 1204

Converting simplex bearer to duplicated bearer on IP-PNC port networks (with S8700-series Media Servers
!
CAUTION:
If, in the unlikely event that a failure occurs on an active TN2602AP circuit pack
CAUTION:
during the setup and administration of duplication, active calls being carried on
the circuit pack are dropped. In addition, TN2602AP call processing and
interchange activity is tracked through the MEDPRO-C maintenance object. See
Maintenance Alarms for Avaya Communication Manager 3.1, Media Gateways
and Servers, 03-300430, for more information.
Checklist for converting a port network to duplicated
TN2602AP IP Media
Resource 320 circuit packs
The following sections describe the installation process:
Checking your shipment, if not reusing existing TN2602AP circuit packs
●
Accessing the media server maintenance web interface
●
Accessing the server command line interface with SSH protocol
●
Checking software release
●
Determining the existence and location of TN2302 and TN2602AP circuit packs
●
page 1208
Upgrading firmware on the existing TN2602AP circuit packs, if necessary
●
Disabling an existing TN2602AP circuit pack or TN2302 circuit packs
●
Removing the TN2302 circuit pack hardware
●
Connecting the cables to any new TN2602AP circuit packs
●
Installing the TN771DP Maintenance Test circuit pack
●
Verifying installation and voice channels
●
Upgrading firmware on the new TN2602AP circuit packs, if necessary
●
Administering the node name for the TN2602AP circuit pack, if necessary
●
Administering the IP interface for the TN2602AP circuit packs
●
Testing the external connection to the LAN
●
Verifying active call status
●
1204 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 1207
on page 1209
on page 1211
on page 1217
on page 1217
on page 1205
on page 1206
on page 1206
on page 1208
on page 1209
on page 1210
on page 1211
on page 1213
on page 1213
on page 1214
on