Avaya S8100 Series Manual page 670

Migrating from a DEFINITY Server SI in an SCC to an S8700-Series Media Server with Fiber-PNC
Setting up a high-reliability or critical-reliability configuration
Note:
You can replace the tone clocks with the TN2312BP Internet Protocol Server
Note:
Interface (IPSI) circuit packs and administer the IPSI circuit packs ahead of time.
The circuit packs are hot-swappable. Therefore, you do not need to turn off the
PNs or the carriers.
To set up a high- or critical-reliability configuration:
1. Determine in which PNs you must install the IPSI circuit packs. For more information, see
Determining IPSI placement in port networks
Note:
Not every port network requires an IPSI circuit pack.
Note:
2. Type status system all. Press Enter to determine:
Which port networks contain TN2182 Tone Clock circuit packs
●
Which media gateway contain tone clock circuit packs
●
Which is active
●
Which is standby
●
3. If needed, type set tone-clock cabinet carrier. Press Enter to make the tone
clock in the B carrier active.
4. Remove the ground plate and the upper and the lower rear covers from the media gateway.
For more information, see
page 671.
670 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 666.
Removing ground plate and upper and lower rear covers on